All Products

Also known as a thread disc, or thread stopper. For Brother sewing machines with horizontal spool pins. Choice of sizes.Genuine Brother parts.

Screw for attaching presser foot holder Fits Janome Sewing machines and many others. 

Fits a range of Janome electronic machines including models: CXL 301, XC50, 1600P, 6125, 6260, DC3050, Memory Crafts 4900, 5900, 300E, 350E, 9500, ...

For Janome, Brother, Toyota, Frister+Rossmann, Riccar, Bernina and many more brands. 240V : 15W

Genuine Bernina bulb suitable only for Overlocker models 800DL / 800D / 700D Screw cap bulb. 10W

Janome 'pop up' type bobbin cover. Fits wide range of Janome machines with a drop-in bobbin. Approx dimensions 4.2cm x 3.6cm Fits the following Jan...

Small bayonet cap light bulb for Janome Sewing Machines, Newhome, Singer and many more brands.240V : 15W

The Small bayonet cap light bulb for Bernina models 1008 along with many of their earlier machines240V : 15W

Genuine Bernina part.The screw that holds the needle can become worn and the tip can break off.This is the replacement screw Note: make sure no bro...

Standard bobbin case that's used by lots of manufacturers where the bobbin case loads into the front of the machine. Typically: Jones, Brother, New...

Power cable with UK mains plug. Genuine Brother product. As supplied with wide range of their current sewing machines and models, including but not...

Genuine Bernina product For Models - 004 / 008 / 800DL / 334 / 335 / 1100 / 2000

Power cable with UK mains plug. Genuine Janome product. As supplied with wide range of their current sewing machines and models, including but not ...

Genuine Janome product for specifically Janome Air thread overlocker AT 2000 D

Genuine Brother Replacement Upper blade fits Brother overlockersmodels: 1034D, 3034D, 3034DWT, 4234D, 2104D  

Genuine Janome product for models: 204D / 8002D / 9102D / 9200D / DM234 / 8002

For Models - 004-008 / 334 / 335 / 1100 / 2000 / 800-800DL

Replacement blade fits Brother overlocker 2104D / 3034D / 3034DWTGenuine Brother part  

Replacement lower blade fits Brother 1034D  

Genuine Janome bobbin casefor models 230DC / MC 8900 / MC 8200 / ATELIER 6 / ATELIER 5 / ATELIER 3 / Memory Craft 6700P /TXL607 / QXL605 / MXL50 / ...

Genuine Janome product

replacement - fits Bernina machines with built in needle threader

Genuine Bernina bobbin caseStandard 'CB' type that has been used with most Bernina Sewing Machines old and new from the early models 707, 801, 807,...

Foot control and lead, complete assembly. Genuine Janome product. As supplied with wide range of their current and earlier sewing machines, includi...