Sewing Machine Feet

To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm) wide bias strip of light weight fabric, or use packaged, narrow double fold Bias Bind...

Genuine Janome ankle for clip on presser feet.Ideal if you've mislaid the presser foot holder that came with your machine. Supplied un-packaged Fit...

This presser foot is used for sewing the edge of fabric while folding it twice to a narrow width about 1/8” (3mm) Key Features Demo Video Fitting ...

A straight stitch needle plate and straight stitch presser foot : for improved straight stitching, especially when sewing finer fabrics. The small...

The hemmer foot sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and ...

The straight stitch foot is often used on very fine or very heavy fabrics. This particular foot is flat on the underside to provide an even pressur...

For Brother sewing machines with a top load / drop-in bobbinUse with your sewing machines’ blind hem stitches

Use your overlocker to blind hem with this additional blind hem foot equipped with a guide to help keep your stitching straight. Blind Hemming is n...

Sew quick tucks in light to medium weight fabrics. Use with 2 mm Twin Needle

The Brother walking foot helps your sewing machine feed layers of fabric through evenly.A popular accessory for Quilting but also useful for sewin...

Stronger metal body, quieter operation and with improved sewing quality the new Brother Dynamic walking foot is a must for all dressmakers and quil...

A really useful package that's ideal - not only for quilting but also dressmaking, soft furnishing, craft - in fact sewing of any kind ! This great...

The hemmer foot sometimes referred to as the rolled hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table linens and ...

Open at the front to give a better view whilst sewing, very useful for satin stitch, applique & embroidery.

Use for making decorative fringes, fagotting stitches, tailor tacking. This foot is available in Janome Category B or Category C see 'Fitting' fo...

Key Features Fitting Type This presser foot is used for folding bias tape in four while edging fabric at a width of about 0.2” (5mm). Afte...

Key Features Demo Video Fitting Type The Bernina Adjustable stippling foot number 73 simplifies free-motion quilting and is ideal for...

Stitch a rolled hem in sheer and very lightweight fabrics for evening wear, lingerie, scarves. Use a Zigzag with stitch length set to 3 and width s...

This presser foot is for sewing on buttons and raises the button slightly off the fabric to give a slight thread shank to enable easy buttoning, an...

The Juki button sew foot Key Features Demo Video Fitting Type For attaching buttons on garments. Demo Video   Genuine Juki accessories: c...

The J Foot is used for overcast stitches that stitch to the side and can pucker or curl the fabric to prevent the fabric from curling under. The t...

Sew a scant 1/4" seam allowance. Red lines mark 1/4" and 1/8" pivot points in front of and behind the needle.Sew with Straight stitch, length 2.0-...

The Candlewicking Foot has a deep tunnel on the underside to feed over a built up stitching. Program a "French Knot" stitch on computer Husqvarna ...

Key Features Fitting Type The Juki Narrow Zip foot allows closer and more accurate sewing of zips and also piping, snap tape etc. Packaged wi...