Janome

The walking foot, also known as even feed foot is one of the most useful accessories for your sewing machine.With a built in feed which 'walks' alo...

Useful screwdrivers to have in your sewing machine accessory kitThe Small screwdriver is good size for adjusting bobbin tensions on machines, etc. ...

Ideal for quilting the Janome Purple Tip Needles are designed to prevent skipped stitches with heavy fabrics, including knits, while doing sewing...

Handy  gadget to ease the chore of threading your machine needle. Works on virtually all domestic machines and overlockers. INSTRUCTIONSPlace your ...

Neat foot ideal for accurate zipper insertion and a must when piping with small, large or jumbo piping cords.the green adjusting screw at the rear...

Neatly make and apply corded piping with professional results. The piping foot (sometimes mistakenly referred to as the cording foot) is designed w...

Pack of 2 narrow hem feet. One foot produces a 4mm hem and the other produces a 6mm hem. Use to stitch narrow hems usually found on shirt tails, ta...

Janome 100% Polyester smooth feeding bobbin thread, recommended for Janome computerized embroidery machines.

Janome darning or free hand foot is a spring loaded foot which ‘hops’ during sewing, allowing you to move the fabric. Ideal for freehand quilting a...

This Bias Binder foot has a funnel guide for binding edges with ¼” (7mm) bias binding : cut a 1” wide (25mm) bias strip of lightweight fabric and s...

Gives a perfect ¼” seam allowance, the edge guide is ideal for accurate piecing.Please note the category D version is supplied un-packaged Genuine ...

None stick foot, permits easy sewing of fabrics that might otherwise stick to a metal foot e.g. Ultrasuede, vinyl, man-made leather etc. Demo Vide...

Fits a range of Janome electronic machines including models: CXL 301, XC50, 1600P, 6125, 6260, DC3050, Memory Crafts 4900, 5900, 300E, 350E, 9500, ...

Use with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent fraying. The foot guides the fabric and keeps the e...

Metal bobbin for Janome 1600P industrial sewing machinesgenuine Janome product

The Janome Gathering foot is used for creating soft gathers in lightweight fabrics. Demo Video Fitting Guide Genuine Janome presser feet for the b...

Pack of 10 bobbins Only for Husqvarna Emerald Class models that take a drop-in bobbin and E class with front loading bobbin. This is the same bobbi...

For lightweight fabrics. Sometimes referred to as the Rolled Hemmer. Used to stitch narrow rolled hems, usually found on shirt tails, table linens ...

Sew in the ditch of a seam with this clever little foot. The extended guide helps you stay in the seam while the machine stitches. Perfect for quil...

Genuine Janome, High Capacity Metal bobbin specifically for the Janome HD9 Sewing machines NOTE: Orderfor the Version 1 HD machines there is no par...

The clear view foot gives you a better view of what you are sewing. It is especially useful for decorative topstitching and also be used with other...

As its name suggests this foot has rollers that roll against the fabric and act very much like the track on a bulldozer for sewing up and over heav...

Edge stitching could not get any easier with the Sliding Guide Foot! Ideal as a seam guide, with this foot you can adjust the flange to sit up to a...

The Zig-Zag Foot A comes standard on all Janome Sewing machines and is used for most general sewing, from straight stitch to zig-zag. The unique Bl...